Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Bulk Powder Tanks

Designed for the transportation of bulk powder commodities

SAVE TIME AND COST ON CARGO TRANSFER

Seaco’s fleet of intermodal Bulk Powder tanks help support industries in the seamless logistical transfer and handling of cargo such as cement, plaster, fly ash, limestone and flour.

Our tanks have a capacity of 24.5m3 and a maximum gross weight of 34,000kg. Equipped with 3 fluidisation cone discharge arrangement, the aeration on each cone for local fluidization helps prevent product build-up and helps the efficient flow of powder, assisted via 4 inch outlet pipe system and 4 inch camlock couplings.

LR, CSC and CLASSIFICATION SOCIETY APPROVED. Tanks in accordance with ISO104, TECHNICAL CONDITION AND TESTING METHOD IN ISO1496-3 SERIAL 1-CONTAINER.

The authorised Dangerous Goods Advisor should confirm fitness to purpose of any tank and that the cargo is compatible and will not attack the tank vessel. Tank containers are supplied in accordance with a signed lease and Seaco General Trading Terms.

Overview

  • Design Code: The design code AS1210 (where applicable) and AS/NZ 3788-2006 (Australia Standards/New Zealand Committee pressure equipment in-service inspection) to ensure every pressure vessel is protected by a relief device that prevents the vessel pressure from rising more than 110% of the vessel’s design pressure.
  • 3 Loading Hatches: Fitted on the top of the tank enabling loading via silo.
  • Manlid: Quick release DN 500mm latch manlid
  • Safety Relief Valve: Fitted with a  2 inch aluminium safety valve to help protect the tank from accidental over-pressure and implosion from unwanted vacuum conditions.
  • Compressed Air Discharge: Bulk powder is fluidised in the tanks by compressed air and then discharged to the pipes using the air flow from the compressor.
  • Protective Coating: Epoxy resin surface coating inside the container to help protect the internal surface from corrosion and decay.
  • Shell Material: Carbon steel construction with a 4mm carbon steel barrel thickness.
  • Industry Approvals: LR (Lloyds Register) certified that the tank confirms to industry quality standards, international conventions and LR class requirements.  CSC (Convention for Safe Containers) certified our equipment has been tested and meets specific requirements.
SELECT A MEASUREMENT
CAPACITIES
Cargo Nominal25.8 m3
Cargo Effective24.5 m3
Cargo Nominal911 ft3
Cargo Effective865 ft3
WEIGHTS
Maximum Gross
Weight
34,000 kgs
Tare
Weight
3,700 kgs
Payload (maximum)30,300 kgs
Maximum Gross
Weight
74,957 lbs
Tare
Weight
8,157 lbs
Payload (maximum)66,800 kgs
FRAME DIMENSIONS
External Length6,058 mm
External Width2,438 mm
External Height2,896 mm
External Length20 ft
External Width8 ft
External Height9 ft 6 ins
PRESSURES
Design Pressure2 bar
Working Pressure1.8 bar

 

Design Pressure29 psi
Working Pressure26 psi
AIR SUPPLY
Air Supply20 m3 / min
Air Supply706 ft3 / min
LOADING
Air Inlet Diameter76.2 mm
Loading Lid Diameter500 mm

 

Air Inlet Diameter3 ins
Loading Lid Diameter1 ft 8 ins

 

DISCHARGING
Discharge Pipe Diameter101.6 mm
Temperature<50°C
Height25 m (max)
Speed to maximum 25m height at a horizontal distance of 30m>0-5 ton/min
Discharge Pipe Diameter4 ins
Temperature<122°F
Height82 ft (max)
Speed to maximum 25m height at a horizontal distance of 30m>0-5 ton/min
RESIDUAL
Residual<60 kgs
Residual<132 lbs

Explore More Tank Containers

INTERESTED?

FOR FURTHER INFORMATION AND AVAILABILITY, SPEAK TO YOUR LOCAL REPRESENTATIVE
CONTACT NOW